↓ Skip to main content

CMSC Lab Internship

Overview
#

My work at the Composites Manufacturing & Simulation Center (CMSC) involved designing and fabricating high-precision composite components and molds. I utilized advanced CAD software and manufacturing techniques to produce parts that met stringent performance criteria for cutting-edge research applications.

EIC pfRICH Composite Mirror Prototypes
#

As a part of the Electron-Ion Collider (EIC) project, I contrubuted to the prototyping of composite mirrors for the proximity-focusing Ring Imaging Cherenkov detector (pfRICH).

Key Responsibilities
#

Building on previous work, my responsibilities included:

  • Finalzing mirror CAD designs using Fusion 360 and Siemens NX.
  • Manufacturing CNC precision molds for composite layups.
  • Manufacturing Carbon Fiber Mirror substrates using prepreg layup and vacuum bagging techniques.
  • Glueing Lexan base layers to the composite substrates to form the final mirror structure.
  • Producing FDM mounting points and alignment jigs to ensure accurate postproccesing and assembly.

Results
#

  • Successfully delivered multiple high-precision composite mirror prototypes that met the performance requirements set by BNL physicists for the EIC project.
  • Mirrors were validated as the most performant between multiple laboratories working on similar prototypes.

Reflection Imaging Results
Source1 Reflection from my mirrors(left) proved to be superior to alternative samples

Manufacturing and CAD
#

EIC pfRICH SystemOuter Conical Mirror CAD
EIC System Image
Source2
My Mirror CAD

The manufacturing for prototype outer mirrors required manufacturing precision molds to tight requirements. Machining, sanding, and prepping the mold out of Renshape on a 3-axis CNC took several days of work.

Mold final surface machining in progress
Maching Mold in progress
Maching Mold in progress - close up
Precision Mirror Molds for EIC

With the mold complete and prepared, carbon layups could be performed. Using the markings on the mold, layers of unidirectional prepreg were applied. Kapton release film and perforated release film were used to ensure as smooth of a surface as possible, while also removing excess resin during the curing process.

Cured Outer Mirror Substrate
Great Carbon Mirror
The Inside view
Final cured carbon fiber mirror substrate after layup and curingInner view of the cured carbon fiber mirror substrate, showing consistent reflectivity

Glue Prep Mirror Mold
Preparing the mold surface for composite layup by applying mold release and glue layers


  1. Jihee Kim (BNL), Jan Vanek(UNH), Brookhaven National Laboratory, US Department of Energy ↩︎

  2. https://indico.jlab.org/event/855/contributions/14993/attachments/11545/17873/eic_early_career_anim_072224.pdf ↩︎